How to Easily Remove Hard Water Stains from a Sink or Faucet | March 2, 2025

Hard water stains are those stubborn, chalky white or cloudy deposits caused by mineral buildup from calcium and magnesium in your tap water. They can make your sink and faucet look dull and dirty, even when regularly cleaned. Luckily, with the right techniques and a few household ingredients, you can easily restore their shine!
🛠️ What You’ll Need:
✔ White vinegar (dissolves mineral buildup & disinfects!) 🧴
✔ Baking soda (gentle abrasive for deep cleaning!) ✨
✔ Lemon juice (natural acid that breaks down stains!) 🍋
✔ Dish soap (removes grease & grime!) 🧼
✔ Microfiber cloths or paper towels (to avoid scratches!) 🏠
✔ Old toothbrush or soft sponge (to scrub into hard-to-reach areas!) 🪥
✔ Plastic bag & rubber band (for soaking faucet heads!) 💦

👨‍🔧 Step-by-Step Guide to Cleaning Hard Water Stains

🛑 1. Soften the Hard Water Stains with Vinegar
Soak a cloth or paper towel in white vinegar.
Wrap it around the affected sink area or faucet and let it sit for 15–30 minutes. (The vinegar will break down the mineral deposits!)
Remove the cloth and wipe the area clean with a damp sponge.
🧽 2. Scrub with Baking Soda Paste (For Stubborn Stains!)
In a small bowl, mix baking soda with a little water until it forms a thick paste.
Use a soft sponge or an old toothbrush to scrub the paste onto the stains.
Let it sit for 5–10 minutes, then rinse with warm water.
💦 3. Deep Clean Faucet Aerators & Shower Heads
If white, crusty buildup is clogging the faucet aerator or showerhead, remove it (if possible).
Place it in a bowl of vinegar for 30–60 minutes to dissolve buildup.
Scrub gently with an old toothbrush and rinse well.
If the aerator can’t be removed, fill a plastic bag with vinegar, place it over the faucet, and secure it with a rubber band for 30 minutes.

Continued on next page

Page: 1 sur 2

SEE MORE..

Share Share Share

Thanks for your SHARES!