Instructions:
Prepare the sharpening surface: Place the sharpening stone on a stable surface and make sure it does not move during use. If using a honing rod, hold it securely in one hand.
Apply WD-40: Spray a small amount of WD-40 directly onto the whetstone or honing rod. Alternatively, you can spray WD-40 onto the knife blade itself.
Grinding motion: Hold the knife against the whetstone or honing rod at a consistent angle (usually about 20 degrees). Using light pressure, move the blade across the surface in a sweeping motion, starting at the base of the blade and working toward the tip. Repeat this motion several times on each side of the blade.
Test the sharpness: After sharpening, gently wipe the blade clean with a cloth or paper towel to remove any WD-40 residue. Test the sharpness of the knife by carefully cutting through a piece of paper or a soft fruit. If the blade cuts smoothly and with minimal resistance, it is ready for use.
see next page
How to clean a kitchen sink
The Ultimate Residue-Free Floor Cleaner Recipe
Pay Attention to the Color of Your Stove Flames
I put it on the toilet brush and use it to clean the toilet. Limescale deposits disappear in no time
Actr3ss Jennifer Anist0n is l0ved by milli0ns.
Turmeric and Aloe Vera Gel for Skin Brightening and Hydration
