Winterize Your Windows (Page 2 ) | December 14, 2023
Annonce:

Switching PVC windows to winter mode is straightforward. It involves adjusting the sealing mechanism. Locate an adjustment roller or a metal pin on the frame of the movable part of the window, which becomes visible when opened. This pin helps to adjust the window’s tightness based on your needs.

Advertisement:

To set the windows to winter mode, tighten the screw on the frame by about 90 degrees. This can usually be done with your fingers, pliers, or a special key, depending on the window model. When the weather gets warmer, simply loosen the screw to switch back.

Winter mode in windows means pressing the seal more firmly against the window frame, reducing the amount of fresh air entering your home or building. While this function has its advantages and disadvantages, one key benefit is the reduced risk of allergies due to better air circulation.

Seasonal Adjustments Are Essential
The adjustment of this accessory varies by type – it might require turning by hand, using pliers, or a screwdriver. Sometimes, you need to pull the mechanism before turning it.
The most crucial seasonal adjustment for window frames is switching them between ‘summer’ and ‘winter’ modes. In ‘winter’ mode, the rubber seal starts to deteriorate over time. PVC window owners often need to replace the rubber seal after a few years, especially if the window is not switched to a less intense clamp in ‘summer’ mode, as recommended by the manufacturer.
Implementing these tips is essential to reduce your heating costs in winter while maximizing efficiency.

Advertisement:

Next: Soft and Buttery Homemade Rolls
READ IT!

Thanks for your SHARES!

Advertisement: